500g Toner Personality Pavement Color Add Color Concrete Dye Color Paste Iron Oxide Pigment DIY Manually Paving Concrete molds

Product specifications: net content 500g

Pigments are used in cement floors and cement products, as well as inorganic pigments in paint plastics,Their weatherability and tinting strength are very good. The ratio of pigment to cement is about 3-5%. Add water and mix well.

The steps are as follows:

1. Proportionately mix the required materials (cement, pigment, sand, etc.)

2. Put the ingredients dry powder together and mix well to prepare for the next step.

3. Add an appropriate amount of water and stir evenly (to adjust the degree of dryness and wetness so that it can be demoulded immediately)

4. If you need to add gravel or other, please add it last.

use:

Suitable for the following various building structures and coloring of cement. A variety of indoor and outdoor colored concrete surfaces and architectural surfaces. Such as wall, floor, floor tiles, roof tiles, panels, sinks, blocks, towers, color mortar and so on. Colored tiles, ridge tiles, terrazzo and mosaic tiles for laying indoor and outdoor walls, floors, stairs, porches, passages, etc.

High chemical stability and physical fastness:

Alkali resistance: It is very stable for any concentration of alkalis and other kinds of alkaline substances, especially cements and lime mortars commonly used in construction, and does not cause chalking on cement building components, nor does it affect its strength.

Acid resistance: It has certain resistance to general weak acid and dilute acid.

Lightfast: The color does not change under intense sun exposure.